HPX 5000 Package
FOB Houston, TX
FOB Chicago Illinois 9/27/24
Package Includes
- Kingston HPX 5000 (40" x 200") 9.25" Bore Engine Lathe
- 11.9" Steady Rest
- 23.5" Steady Rest
- Taper Attachment
- Newall NMS 800 Digital Readout System
- Bison 28" 4-Jaw Forged Steel Independent Chuck (Front)
- Bison 25" 3-Jaw Forged Steel Scroll Chuck (Rear)
Standard Features
- 30 HP, 230V/460V, 3 Phase, 60 Cycle Motor, Switch and Wiring Complete
- Spindle Bore: HP 7.09” / HPX 9.25” or 10.1"
- Spindle Nose: ASA-A2-15
- 16 Spindle Speeds: 8 – 700 RPM (HP), 9 – 600 RPM (HPX)
- Headstock Spindle Adaptor: ASA-450 to MT#6
- Hydraulic Brake System
- 4-Way Rapid Traverse
- T-Slot on Tool Slide
- Hardened and Ground Bed and Cross Slide Ways
- 2-Speed Drive Tailstock Quill
- Coolant System with Pump and Piping
- Pull Drawer Chip (Coolant) Pan
- Rear Chuck Adapter Installed
- Front & Rear Chuck Guards
Optional Accessories
- 11.9”, 19.7”, 23.5” Steady Rest with Roller Jaws
- Roller Bracket
- 7.9” Follow Rest
- Telescopic Taper Attachment ±8° & 3.5”/foot, 19.7” Stroke
- Drilling Attachment
- Carriage Stops
- Splash Guard (Factory Installation Only)
- Chip Conveyor (Factory Installation Only)
- Digital Readout (DRO) + Installation
- Live Centers
- Aloris Quick Change Tool Post & Sets
- 3-Jaw & 4-Jaw Manual Chucks
Package Includes
- Kingston HPX 5000 (40" x 200") 9.25" Bore Engine Lathe
- 11.9" Steady Rest
- 23.5" Steady Rest
- Taper Attachment
- Newall NMS 800 Digital Readout System
- Bison 28" 4-Jaw Forged Steel Independent Chuck (Front)
- Bison 25" 3-Jaw Forged Steel Scroll Chuck (Rear)
Standard Features
- 30 HP, 230V/460V, 3 Phase, 60 Cycle Motor, Switch and Wiring Complete
- Spindle Bore: HP 7.09” / HPX 9.25” or 10.1"
- Spindle Nose: ASA-A2-15
- 16 Spindle Speeds: 8 – 700 RPM (HP), 9 – 600 RPM (HPX)
- Headstock Spindle Adaptor: ASA-450 to MT#6
- Hydraulic Brake System
- 4-Way Rapid Traverse
- T-Slot on Tool Slide
- Hardened and Ground Bed and Cross Slide Ways
- 2-Speed Drive Tailstock Quill
- Coolant System with Pump and Piping
- Pull Drawer Chip (Coolant) Pan
- Rear Chuck Adapter Installed
- Front & Rear Chuck Guards
Optional Accessories
- 11.9”, 19.7”, 23.5” Steady Rest with Roller Jaws
- Roller Bracket
- 7.9” Follow Rest
- Telescopic Taper Attachment ±8° & 3.5”/foot, 19.7” Stroke
- Drilling Attachment
- Carriage Stops
- Splash Guard (Factory Installation Only)
- Chip Conveyor (Factory Installation Only)
- Digital Readout (DRO) + Installation
- Live Centers
- Aloris Quick Change Tool Post & Sets
- 3-Jaw & 4-Jaw Manual Chucks
| Capacity | |
| Swing Over Bed | 40” |
| Swing Over Cross Slide | 31.0” |
| Distance Between Centers | 200” |
| Width of Bed | 22” |
| Height of Center from Leg Bottom | 51.5" |
| Headstock | |
| Spindle Bore | 9.25” |
| Type of Spindle Nose | ASA A2-15 |
| Number of Spindle Speeds | 16 |
| Spindle Speeds | 9 – 600 RPM |
| Gear Box | |
| Number of Feed Changes | 40 Kinds |
| Range of Long. Feeds per Rev. | 0.0024” – 0.0337” |
| Longitudinal Cross | 1/2 of Longitudinal Feed |
| Leadscrew Diameter & Threads per Inch | 1.9” / 2 TPI |
| Threading Range - Whitworth | 1 to 28 TPI (50) |
| Threading Range - Metric | 1 to 28mm pitch (41) |
| Threading Range - Module | 0.5 to 7 M (20) |
| Threading Range - D.P. | 4 to 56 D.P. (40) |
| Tool Slide | |
| Maximum Travel of Compound | 9.4” |
| Maximum Travel of Cross Slide | 21.2” |
| Tailstock | |
| Tailstock Quill Travel | 11.8” |
| Tailstock Quill Diameter | 5.1” |
| Tailstock Center | M.T. #6 |
| Motor | |
| Main Drive Motor | 30 HP (22kw) |
| Coolant Pump Motor | 1/4 HP |
| Dimensions | |
| Floor Space (L x W) | 316" x 87" |
| Weight (lbs) | |
| 19,600 |