HD 2290 Package
FOB Huntington Beach, CA
FOB Chicago, Illinois, September 17, 2024
Package Includes
- Kingston HD 2290 4.09" Bore Engine Lathe
- 10" Steady Rest (standard)
- 15" Steady Rest
- Taper Attachment, Installed
- Micrometer Carriage Stop
- Factory Tool Post Guard
- Newall NMS 800 Digital Readout System, Installed
- Bison 16" 4-Jaw Forged Steel Independent Chuck
Standard Features
- 10 HP 230/460V 3 phase, 60 cycle, Switch & Wiring Complete
- 4.09” Spindle Bore
- Spindle Nose: D1-8 Camlock
- 12 Spindle Speeds (13 – 1200 RPM)
- Lead Screw: 4 TPI
- 10” Steady Rest with Roller Jaws
- 4-Way Tool Post, T-Slot Compound
- Z-Axis Rapid Traverse
- 2-Speed Drive Tailstock Spindle
- Coolant System With Pump And Piping
- LED Worklight
- Emergency Stop Button
- Full-Length Splash Guard & Chuck Guard
Optional Accessories
- Additional 10", 15", and 18.9" Steady Rests
- 7” Follow Rest
- Taper Attachment (included in package above)
- Drilling Attachment
- Carriage Stops
- Live Centers
- Aloris Quick Change Tool Posts & Sets
- Digital Readout (DRO) + Installation (included in package above)
- 3-Jaw & 4-Jaw Manual Chucks
- 20" Face Plate
- Safety Accessories
- NRTL / UL Certification
Package Includes
- Kingston HD 2290 4.09" Bore Engine Lathe
- 10" Steady Rest (standard)
- 15" Steady Rest
- Taper Attachment, Installed
- Micrometer Carriage Stop
- Factory Tool Post Guard
- Newall NMS 800 Digital Readout System, Installed
- Bison 16" 4-Jaw Forged Steel Independent Chuck
Standard Features
- 10 HP 230/460V 3 phase, 60 cycle, Switch & Wiring Complete
- 4.09” Spindle Bore
- Spindle Nose: D1-8 Camlock
- 12 Spindle Speeds (13 – 1200 RPM)
- Lead Screw: 4 TPI
- 10” Steady Rest with Roller Jaws
- 4-Way Tool Post, T-Slot Compound
- Z-Axis Rapid Traverse
- 2-Speed Drive Tailstock Spindle
- Coolant System With Pump And Piping
- LED Worklight
- Emergency Stop Button
- Full-Length Splash Guard & Chuck Guard
Optional Accessories
- Additional 10", 15", and 18.9" Steady Rests
- 7” Follow Rest
- Taper Attachment (included in package above)
- Drilling Attachment
- Carriage Stops
- Live Centers
- Aloris Quick Change Tool Posts & Sets
- Digital Readout (DRO) + Installation (included in package above)
- 3-Jaw & 4-Jaw Manual Chucks
- 20" Face Plate
- Safety Accessories
- NRTL / UL Certification
| Capacity | |
| Swing Over Bed | 22" |
| Swing Over Cross Slide | 13" |
| Swing In Gap | 31.3" |
| Gap Width in Front of the Face Plate | 10.6” |
| Distance Between Centers | 90” |
| Width of Bed | 15.7” |
| Height of Center from Leg Bottom | 42.0” |
| Headstock | |
| Spindle Bore | 4.09" |
| Taper of Spindle Bore & Center | M.T. #7 x #5 |
| Type of Spindle Nose | D1-8 |
| Number of Spindle Speed | 12 |
| Spindle Speed | 13 – 1200 RPM |
| Gearbox | |
| Number of Feed Changes | 16 |
| Range of Feeds per Revolution - Longitudinal | 0.0012” – 0.039” |
| Range of Feeds per Revolution - Cross | 0.0004” – 0.0117” |
| Leadscrew Diameter & Threads / Inch | 1.77”, 4 TPI |
| Range of Inch Threads | 2 – 72 (44) |
| Range of Metric Pitches | 0.2 – 14 (39) |
| Tool Slide | |
| Maximum Travel of Compound | 9.5” |
| Maximum Travel of Cross Slide | 15.8” |
| Tailstock | |
| Tailstock Quill Travel | 9.8” |
| Tailstock Quill Diameter | 2.9” |
| Taper in Tailstock Quill | M.T. #5 |
| Motor | |
| Main Drive Motor | 10 HP |
| Coolant Pump Motor | 1/8 HP |
| Dimensions | |
| Floor Space (L x W x H) | 146” x 47" x 59” |
| Weight | |
| 6,200 lbs |