CX10 3000 Special
FOB Houston, TX
FOB Chicago, Illinois 9/17/24
Package Includes
- Bison 25" 4-Jaw Forged Steel Independent Chuck
Optional Accessories
- 19.7" Steady Rest
- Additional 11.9" Steady Rest
- 7.9" Follow Rest
- Roller Bracket (2-Point Roller Rest)
- 4" Boring Bar Support w/ 3" Sleeve
- Fanuc Arbitrary Speed Threading
- Manual, Hydraulic, & Air Chucks
Standard Features
- Bore: 10.1”
- Swing: 34"
- C.C.: 120"
- 40 HP / 50 HP (30 min)
- 22” Bed Width
- V8 Hydraulic Turret
- Box Way Cross Slide on Carriage
- Manual Hand Wheels
- 11.9" Steady Rest
- Headstock Cooling System
- Hydraulic & Manual Quill Movement
- Rear Chip Conveyor with Cart
- Fanuc 0iTF Plus Controller with Manual Guide i, 10.4” LCD Monitor
Package Includes
- Bison 25" 4-Jaw Forged Steel Independent Chuck
Optional Accessories
- 19.7" Steady Rest
- Additional 11.9" Steady Rest
- 7.9" Follow Rest
- Roller Bracket (2-Point Roller Rest)
- 4" Boring Bar Support w/ 3" Sleeve
- Fanuc Arbitrary Speed Threading
- Manual, Hydraulic, & Air Chucks
Standard Features
- Bore: 10.1”
- Swing: 34"
- C.C.: 120"
- 40 HP / 50 HP (30 min)
- 22” Bed Width
- V8 Hydraulic Turret
- Box Way Cross Slide on Carriage
- Manual Hand Wheels
- 11.9" Steady Rest
- Headstock Cooling System
- Hydraulic & Manual Quill Movement
- Rear Chip Conveyor with Cart
- Fanuc 0iTF Plus Controller with Manual Guide i, 10.4” LCD Monitor
| Capacity | |
| Swing Over Bed | 34" |
| Maximum Cutting Diameter | 21.6” |
| Distance Between Centers | 120” |
| Width of Bed | 22” |
| Headstock | |
| Spindle Bore | 10.1” |
| Spindle motor | 40 HP / 50 HP (30 min) |
| Type of Spindle Nose | A2-15 |
| Hght. Floor to Spindle Center | 48.6” |
| Gear Box | |
| Number of Speed Ranges | 4 |
| Spindle Speed (RPM) | 6 – 600 |
| Turret | |
| Standard Turret | V8 Hydraulic |
| Turret Options | H4, Toolblock with T-slot |
| Traverse | |
| Max. Stroke X-Axis | 20.1” |
| Max. Stroke Z-Axis | 126.0” |
| Rapid Traverse X-Axis | 157"/min |
| Rapid Traverse Z-Axis | 236"/min |
| Motor | |
| X-Axis Servo Motor | 5.3 HP |
| Z-Axis Servo Motor | 9.4 HP |
| Ball Screw | |
| X-Axis | ø1.26”, P = 5 |
| Z-Axis | ø2.5”, P=10 |
| Tailstock | |
| Tailstock Quill Center | M.T. #6 |
| Tailstock Quill Diameter | Ø5.9” |
| Tailstock Quill Travel | 8.6” |
| Dimensions (L x W) | |
| Floor Space | 268" x 99" |
| Weight (lbs) | |
| 18,480 |
| Total Power Required | |
| 60 KVA |