CS14 2000 Special
FOB Houston, TX
FOB Chicago, Illinois, 9/17/24
Package Includes
- Kingston CS14 2000 (45" x 80") Flat Bed CNC Lathe
- 15.35” Steady Rest with Two Sets of Sleeves (1.57” ~ 8.66”, 8.26” ~ 15.35”)
- Bison 32" 4-Jaw Forged Steel Independent Chuck
Standard Accessories
- Bore:14.7"
- Swing: 45"
- C.C.: 80"
- 50 HP / 60 HP (30 min)
- 28.5” Bed Width
- Box Way Cross Slide and Carriage
- V8 Hydraulic Turret
- Heavy-Duty Tailstock (26,000 lbs) with Built-in Center
- Front & Rear Chuck Ready
- Rear Spindle Safety Door
- Coolant System w/ 6-Bar Pressure
- Water Spray Gun for Chip Cleanup
- Rear Chip Conveyor
- FANUC 0iTF-Plus Controller w/ Manual Guide i & Threading Repair, 10.4" Monitor
Optional Accessories
- Additional Small Steady Rest with 2 Sets of Jaws (1.57" ~ 8.66", 8.26" ~ 15.35")
- Large Steady Rest with 2 Sets of Jaws (13.77" ~ 20.47", 20.47" ~ 27.55")
- 7” Boring Bar Support (Other Sizes Available)
- Reducer Sleeves for Boring Bar Supports
- Manual, Hydraulic & Air Chucks
Package Includes
- Kingston CS14 2000 (45" x 80") Flat Bed CNC Lathe
- 15.35” Steady Rest with Two Sets of Sleeves (1.57” ~ 8.66”, 8.26” ~ 15.35”)
- Bison 32" 4-Jaw Forged Steel Independent Chuck
Standard Accessories
- Bore:14.7"
- Swing: 45"
- C.C.: 80"
- 50 HP / 60 HP (30 min)
- 28.5” Bed Width
- Box Way Cross Slide and Carriage
- V8 Hydraulic Turret
- Heavy-Duty Tailstock (26,000 lbs) with Built-in Center
- Front & Rear Chuck Ready
- Rear Spindle Safety Door
- Coolant System w/ 6-Bar Pressure
- Water Spray Gun for Chip Cleanup
- Rear Chip Conveyor
- FANUC 0iTF-Plus Controller w/ Manual Guide i & Threading Repair, 10.4" Monitor
Optional Accessories
- Additional Small Steady Rest with 2 Sets of Jaws (1.57" ~ 8.66", 8.26" ~ 15.35")
- Large Steady Rest with 2 Sets of Jaws (13.77" ~ 20.47", 20.47" ~ 27.55")
- 7” Boring Bar Support (Other Sizes Available)
- Reducer Sleeves for Boring Bar Supports
- Manual, Hydraulic & Air Chucks
| Capacity | |
| Swing Over Bed | 45" |
| Swing Over Cross Slide | 27.5" |
| Maximum Cutting Diameter | 41.5" |
| Distance Between Centers | 80” |
| Maximum Cutting Length | 80” |
| Width of Bed | 28.5" |
| Headstock | |
| Spindle Bore | 14.7" |
| Spindle Motor | 50 HP / 60 HP (30min) |
| Type of Spindle Nose | A2-20 |
| Gear Box | |
| Number of Speed Ranges | 2 |
| Spindle Speed (RPM) | 4 — 450 |
| Turret | |
| V8 Hydraulic (Std), H4 (Opt) |
| Traverse | |
| Max. Stroke X-Axis | 22.0" |
| Max. Stroke Z-Axis | 82.7” |
| Rapid Traverse X-Axis | 236”/min |
| Rapid Travers Z-Axis | 236”/min |
| Motor | |
| Servo Motor X-Axis | 5.3 HP |
| Servo Motor Z-Axis | 8 HP |
| Ball Screw | |
| X-Axis | Ø1.41”, P6 |
| Z-Axis | Ø2.48”, P12 |
| Tailstock | |
| Tailstock Quill (Nose, Taper, Bearing) | A-1-8, M.T. #6, 33024 |
| Tailstock Quill Diameter | Ø9.4” |
| Tailstock Quill Travel | 7.1" |
| Dimensions | |
| Floor Space (LxW) | 229” |
| Machine Height | 88.7" |
| Net Weight | |
| 29,172 lbs |
| Total Power Required | |
| 100 KVA |