KMT 6V
All-in-One Turret Milling Machine

Overview

The new all-in-one KMT-6V is a welcome addition to Kingston’s celebrated line of KMT manual turret mills. This fully outfitted milling machine includes special features such as X- and Y-axis power feeds controlled by a Yaskawa frequency inverter drive, longer 54” table, motorized Z-axis auto-knee with rapid function, auto-lubrication, cooling pump & system, coolant & chip pan, halogen worklight, and convenient control box (complete with E-stop button) in order to manage all of the features listed above. The KMT-6V also features a rugged 5 HP motor and a spindle with a Class 7 precision bearing and NT#40 nose—with speeds up to 4,200 RPM and a maximum runout of .0002 inches. The knee and table ways are hardened and ground, while a heavy-duty saddle support runs the full width of the table for extra stability. Kingston’s KMT-6V is strong, reliable, and accessorized.

KMT 6V Special Features

  • X & Y-Axis Clutch-Type Auto-Feeds Controlled by Yaskawa Frequency Inverter Drive (180 Parameters)
  • 1HP Elevating Motor (Auto-Knee)
  • Coolant Pump & System
  • Convenient Multi-Function Control Box w/ E-Stop & Special Features Listed Above
  • 10” x 54” Table
  • Auto-Lubrication System (2 Switches)
  • Coolant & Chip Pan
  • Halogen Work Light
  • Simultaneous X & Z-Axis or Y & Z-Axis Movement Possible

Other Standard Features

  • Main Motor: 5HP, 220V only, 3 Phase, 60 Cycle Main
  • NT#40 Spindle Nose
  • Class 7 Spindle bearings
  • Variable speed change (60 – 4200 RPM)
  • Chromed Quill
  • 3 Quill Feeds Up & Down With Auto Stops
  • Max Spindle Accuracy Within .0002” (.0051mm)
  • 10” x 54” Hardened & Ground Table
  • Square Ways in Both Y & Z Directions
  • Hardened & Ground Back Gear & Clutch
  • Double Nuts Backlash Eliminator On X+Y Axes
  • Double Lock for Table and Knee
  • Adjusting Tool & Tool Box

Optional Accessories

  • A & T Mechanical Power Lock Drawbar
  • Yaskawa Frequency Inverter Drive (Factory Installation Only)
  • 2-Axis or 3-Axis Digital Readout (DRO)

 

Capacity  
Table 10" x 54"
Travel (X x Y) 34.4" x 15.7"
Travel (Z) Quill 5.0"
Travel (Z) Knee 17.5"

 

Spindle  
Spindle Motor 5HP
Spindle Taper NT#40
Spindle Speed 60 – 4200 RPM
Spindle Power Feed Rate (3 Speeds) 0.0015"/Rev, 0.003"/Rev, 0.006"/Rev
Quill Diameter 4.1"

 

Feeds  
X- & Y-Axis Feeds 0 – 1730 RPM
Z-Axis (Knee) Feed  0 – 560 RPM
X / Y / Z Motors 1/2 / 1/2 / 1 HP

 

Dimensions  
Overall Height 93.7"
Overall Length 60.3"
Overall Width 74.8"
Weight 3,740 lbs